Īny of the Windows terminal emulator applications can be used. On the terminal, the prompt is changed information on Minicom can be found at the following link. See below example for a standard UART (ttyS0) or STLink interface (ttyACM0): See How to use TTY with User Terminal article to find the appropriate tty instance to be used. Hardware flow control is generally set to off (default value is on) and a baud rate of 115200 is usual. The UART configuration that is set with the below command has to match the one from your board: to be checked within board user manual. If a message indicating Minicom does not exist, then install it:.You need first to check that Minicom is installed on your PC. Pictures describing board connections can be found in Category:ST boards 1.1 On Linux ® PC 1 Remote terminal via serial link (UART/USB)ġ Remote terminal via serial link ( UART/USB) įirst of all, you need to connect your host PC to the board via UART.ĭepending on the board, some additional materials may be needed to physically interconnect the board to the console serial port (extension board or adapter to interconnect the UART from the board to the USB PC input).Please contact us for assistance in finding the right solution for your organization. Download SecureCRT for a free 30-day evaluation. This terminal emulator is available for most major platforms, and supports secure operations when remote systems support SSH or Telnet/SSL. SecureCRT supports character attributes and control sequences of VT100 terminals. However, if the system to which the VT100 terminal emulator remotely accesses does not support secure protocols, SecureCRT supports Telnet and Rlogin (Windows only). SecureCRT supports SSH1 and SSH2 (and Telnet/SSL for Windows applications) as well as allows establishing a secure connection via data tunneling. No matter which operating system your local machine is running, SecureCRT supports remote access, terminal emulation, and the host of session management features to make work more efficient. VanDyke Software's VT100 terminal emulator is available for most major platforms- Windows, Mac, and Linux. VanDyke Software works with VTTEST to ensure that SecureCRT correctly emulates VT100 terminals. "Graphic renditions" (bold, underline, reverse, blinking).Extensive VT100 SupportĪlthough VT100 terminals may have had limited capabilities compared to subsequent versions ( VT102, VT220), most character attributes and functions of the VT100 are supported by this terminal emulator. SecureCRT supports VT100 capabilities and character attributes as well as open standard Secure Shell to ensure data security during terminal emulation sessions.
SecureCRT is one of the industry's leading VT100 terminal emulators.
0 kommentar(er)
